call: +86-757-82705605 email:[email protected]
News
Home / News /

How to do the all in one solar street light installation?

0

Published by Mars April 07,2022

  All in one solar street light installation is very simple and easy.It is not need to connect cable,not need to dig a hole and install the battery underground,not need to fix the solar panel on the top of the pole.All in one solar street light installation accessories have include 4pcs m8*100mm bolts,6pcs m8*50mm bolts,3pcs arc-shaped hoop,1set support bracket in the package.Please check if the components are all here when open the packing.Keep clear of the surface of the all in one solar street light with normal detergent to get maximum power generation, clear the dust or tree leaves or any grease.

 

solar powered outdoor street light

         All in one solar street light installation is mainly for the all in one solar street light pole installation.To place the light pole into the best spot with good day lighting. The light pole should be the have suitable length,the thickness 3.0mm with material iron or steel, the diameter 80-110mm.When make the all in one solar street light installation in Northern Hemisphere, please adjust the solar panel to the south as much as possible to collect maximum sunshine radiation, While make the all in one solar street light installation in Southern Hemisphere, By the same token, keep solar panel to north. At the same time please keep it away from any shadow of houses, trees etc. Unfold the knob of fuse of the lamp and check if the fuse works or not, then tighten.If it don’ t have fuse, then it is switch, just turn on the switch.Place the lamp on the pole by its bolts and hoop,and make sure it is steady. All in one solar street light installation  

        For all in one solar street light installation,in order to get the best brightness conditions,please notice the distance between light and light.3 to 4 meters width road,have 10-15 meters distance between pole and pole.4 to 5 meters width road,have 15-22 meters distance.5 to 6 meters width road,have 30 meters distance.6 to 10 meters width road,have 30 to 35 meters distance. Following these steps,the all in one solar street light installation have finished.

 

< >
Latest posts
Technical Support: Magic Lamp