What are the common situations of automatic luminaria smart solar street lights?

          Our automatic luminaria smart solar street lights are mainly composed of solar photovoltaic panels, lithium storage control systems, LED light sources, and light poles. Because automatic luminaria smart solar street lights are installed outdoors, there are occasional accidents.

       What are the common situations in the daily use of automatic luminaria smart solar street lights? Firstly,the light of the automatic luminaria smart solar street lights flashes and the brightness is unstable.When this phenomenon occurs, first determine whether it is a problem with the lamp head. Try changing the lamp head. If the lamp head is replaced,the flashing still exist, you can determine that it is not the problem for lamp head. At this time, the line need to check, and check if the interface of the line is poorly connected or not.

        The second situation,automatic luminaria smart solar street lights can only last for a day or two days.

     The main reasons for this phenomenon are as follows:

       1. Solar lithium battery storage control system is not full charge, solar lithium battery storage control system is not satisfied with the charging of solar energy. In this situation,observe the recent weather conditions, whether it can guarantee daily charging 5-7 hours, if there is a lot of rainy weather in the near future, it is normal to charge only 2 to 3 hours a day. When the weather improves, it can be used normally.

      2. Check whether the solar lithium storage control system is aging. The life of the lithium battery system under normal working conditions is 8-10 years. The third case:the automatic luminaria smart solar street lights stops working and does not light.

       First of all, it is necessary to check whether the intelligent control system is normal, because under normal circumstances, there is a big reason for this. The intelligent control system should be repaired and replaced in time if there is a problem with the intelligent control system. The fourth situation: the solar panel is blocked by some objects.When installing automatic luminaria smart solar street lights, the solar panels should not be blocked by another objects, so that they can achieve normal absorption of sunshine for charging. The maintenance and cleaning of automatic luminaria smart solar street lights should be carried out periodically, especially in some dusty areas, and the frequency should be adjusted once a year, and in areas where dust is relatively small, the frequency can be adjusted to three years to ensure The normal charging work of the solar panel.