4 Mistakes In Installing Solar Street Light 20 Watt

1. There are obstructions around the installation of solar street light 20 watt

There are obstructions around the solar street light 20 watt, which leads to a decrease in the conversion rate of solar panels, such as leaves, buildings, shadows of buildings, and shadow lights of other lamp posts, which affects the solar panels' absorption of solar energy.

2. The solar panel angle is set incorrectly

In different regions, the latitude is also different, so of course setting the tilt angle is also different. Some customers ignore this for aesthetic reasons, which leads to lower conversion rates.

3. The controller is not set correctly

Due to lack of professional knowledge and failure to follow the operation of the manufacturer's technical guidance, the lighting is abnormal.

4. Extend the connection line of the solar panel at will

In some locations, the installation of solar street light 20 watt interferes too much with the battery board. Customers usually choose to extend the connection cable to achieve the purpose of installing 20 watt solar street light, but often ignore the quality of the wires, resulting in low charging efficiency.